Ringer Pitch Adjustment - Mitel SX-200 Practices

.
m .
SWERSET 4 DN
Description
l
Press the Line Appearance key to be answered. The call is answered Handsfree. If
desired, lift and use the handset.
The first line of the display gives the extension number and user name of the calling
party, If the call is being forwarded from the calling party, the extension number and user
name of the forwarding party is given on the second line of the display.
Terminating a Call
To terminate a call:
;
. Hang up, If in Handsfree mode, press the SPEAKER key. If there is a call on consul-
tation hold, the call will ring the set.
l
Press the New Call softkey. If the set is in handsfree mode, it returns to the idle state;
if the handset is in use, the set returns dial tone. If the set has a call on consultation
hold, this call is reconnected.
When one party hangs up, the remaining party returns to the idle state if in handsfree
mode; if off--hook, the party returns to silence or dial tone, (according to system
options).
Ringer Pitch Adjustment
Ringer Pitch Adjustment is one of the SUPERSE~4 l3N telephone's built-in functions.
Perform the adjustment as follows:
l
Press the SUPERKEY
l
Press the More... softkey.
l
Press the Ring Adjust softkey.
l
Press the Ringer Pitch softkey.
0 The set will start ringing.
. Adjust the ringer pitch. The Volume UP key increases the pitch; the Volume DOWN
key decreases the pitch.
0 Press the SUPERKEY. This saves the pitch setting, stops the ringer and returns the
set to its normal state.
9109-096-l 26-NA
Issue 1
Revision
0 126 7-7