Mitel SX-200 Practices page 1139

El .
SUPERSET
Telephone
Table 12-I SUPERSET42UTelephone Environmental Specifications
Operating Environment:
Temperature:
Humidi&:
!3torage/Shipping Environment:
-
Temperature:
Humidity:
O'to
35' C(32' to95' F).
0% to 90% RH, non-condensing.
-25'
to
70' C(-13'
to1
58 F).
0% to 90% RH, non-condensing.
.
Wall-Mounting the SUPERSET 42U Telephone
Wall-hflounting Instructions
12.5 To wall-mount the SUPERSE~42Utelephone reverse the detachable base and plug
the line cord into a modular jack. The "cord winder" in the base stores extra cord (see
Figure 12-4). The wall-mount instructions can be ordered through normal
distribution channels.
Visual Indication Ot System Communications Problems
12.6
If there is a synchronization error, the LCD displays "NO SYNCHRONlmTlON" in the
uppermost row of the display. If there is a communication error, the display reads
"NO COMMUNICATION". If the SWERSE~420 is installed on a circuit that is not
programmed in CDE as a SUPERSET 42U the message "INVALID SET TYPE" and
"CHECK CDE" will appear on the display,
Connection to the A#fink Module
12.7 To accommodate data call operations the SUPERSET is equipped with a /I&U&
network connection, This allows the set to be connected to a A&Link Data Module on
the desktop using only one telephone port. For MiLink Data Module installation
instructions see Section 14, Dataset I 100 Series in this Practice.
9109-096-l 26-NA Issue 1
Revision 0 126 12-9