Mitel SX-200 Practices page 1182

Peripheral Devices
Step
Install DATACABINET 9000, DATASHELF 9100,
DATASETS and Modem Interconnect Panel.
Install Modem
I.
\
Put the DATASEr 2103 in its required position.
2. Connect a modem adapter to the DATASET 2103
FiS-232 port.
3. Connect the modem to the modem adapter with an
W-232 cable.
4.
Connect the modem line plug to the DATASET
PHONE jack.
5.
Connect the DATASEr LINE jack to the
cross-connect block for connection to the PABX.
Power Up
6.
Plug in the dataset and modem.
Chart 15-2 Install Modem Pooling: Standalone DATASET 2103
Actlon Comments
See Chart 1 !5-1 .
The dataset fits under the telephone
on the desktop.
;
The dataset is shown in
Figure 15-4.
Shown in Figure 15-!5.
The modem lTp and Ring leads
pass through the DATASW 2103
(red and green leads) directly to an
ONS line card .
The Ml and MIC leads from the
DATASEr 2103 go to the modem
on the second pair of the cable
(black and yellow).
The data Ip and Ring leads
(yellow/black) connect to a digital
line card.
The voice TIP and Ring leads
(red/green) connect to an ONS line
card.
126 15-16
Revision 0 9109-096-l 26-NA Issue 1