Mitel SX-200 Practices page 1174

Peripheral Devices
lndicatore and Connectore
There are five LEDs on the front of the Rack Mounted DATASET 2102:
- DEVICE TxD
- READY RxD
- ASYNC
- POWER
- CARD FUSE O.K. INDICATION
The connectors on the back of a Rack Mounted DATASET 2102 are:
\
- RS-232 connector (I)
- shelf backplane connector (power and Tip-Ring pair)
- MVMIC connector
The backplane connector pinouts are as follows:
Pin Signal
1 data Tip
2 no connection
3
frame ground
4 signal ground
5 Tl (ac input)
6 T2 (ac input)
7
T2 (ac input)
8 Tl (ac input)
9 signal ground
10 frame ground
11 no connection
12 data Ring
The Ml/MlC RJ-11 modular connector pinouts are as follows:
Pin Signal
I
no connection
2 modem Ml
3 no connection
4 no connection
5 modem MIC
6
no connection
Installation
Any connection of this set to an off premise application, an out of plant applica-
tion, or to any other exposed plant application may result in a safety hazard,
and/or defective operation, and/or equipment damage.
I
126
1!3-8
Revision 0
9109-096-l26-NA Issue1