Controls, Indicators, And Connectors - Mitel SX-200 Practices

Peripheral Devices
STandalone DATASET 2103 Description
15.10 A Standalone DATASm 2103 is packaged in a flat case which can be placed under
a standard desk telephone set. It is functionally the same as the Rack Mounted
DATASET 2102 (they share the same base printed circuit board). The Standalone
DATASET 2103 can be connected to the PABX using a four-wire connection; two
wires connect the dataset to the Digital Line Card, and two different wires connect the
telephone set Tip-Ring pair to an ONS or COV line card; it may also be connected to
a Digital Line Card within the PABX by a single twisted pair (the telephone set is
connected independently). Figure 15-3 shows typical applications of a Standalone
DATASEr 2103 connected to a telephone set and a personal computer or terminal,
twhile Figure 15-4 shows a Standalone DATASEr 2103. The DATASm 2103 base is
206 mm wide x 270 mm long x 35 mm high (8.1 in. x 10.6 x I .4 in,).
Controls, Indicators, and Connectors
The keys and LEDs of a Standalone DATASET 2103 are:
- ATN key
- DISC key
- POWER LED
- READY RxD LED
- DEVICE TxD LED
- ASYNC
The Standalone DATASET 2103 RJ-11 modular connector pins are:
Line
Telephone
1 no connection I
2 data Tip 2
3
voice Tip 3
4
voice Ring 4
5 data Ring 5
6 no connection 6
no connection
modem Ml
voice Tip
voice Ring
modem MIC
no connection
126 1!5-12
Revision 0
9109-096-1264/A
issue 1