Mitel SX-200 Practices page 1127

m .
SUPERSET 410 Telephone
COS Option is enabled. This allows the user to answer a page without having to pick
up the handset. For the duration of the Handsfree Answer Back call the Microphone
Lamp is lit to indicate the ON setting of the Microphone.
TRANWCONF Key-This key is used for Call Transferring and Conferencing. Pressing
the key allows the user to put a call on hold, dial a new number and conference the call,
or transfer the held call (with privacy) to a new number.
Line Appearance Keys
There are 6 Line Appearance Keys arranged in two columns. For CDE purposes these
keys are numbered from bottom to top, right to left, from1 to 6 (as shown below). The
first Line Appearance key is always programmed as the Prime Line. The liquid crystal
display (LCD) indicator provides the status of each line appearance.
6 5
4 3
2 I
These keys may be programmed to access specific lines and specific PABX features.
These keys can be designated during CDE or they can be programmed from the set;
refer to 9109-096-l 05-NA, Features Description.
Speed Call Keys
Any unused Line Appearance key may also be programmed as a personal Speed Call
key. This can be done by the user from the
SUPERSET410.
Ringer Pitch Adjustment
The ringer tone on the
SUPE/?SET
410 telephone is adjusted through Tone
demonstration. To adjust the tone:
I. Dial the Tone Demonstration access code.
2. Dial "33".
3. Press the volume up or down keys ( VA ) until the desired tone is heard. When tone
demo is exited, the tone is remembered by the system,
SUEMET MU Telephone Installation Instructions
11.4 Installation includes unpacking the set, assembling the set and connecting the set to
a wall jack, The connections to the system via the cross connect field are described
in Practice 9109-096-2O&NA, Installation Information.
9109-096-l 26-NA
Issue 1 Revision 0 126 11-7