Mitel SX-200 Practices page 1137

m .
SUPERSET
Telephone
TRANWONF Key - This key is used for Call Transferring and Conferencing.
Pressing the key allows the user to put a call on hold, dial a new number and conference
the call, or transfer the held call (with privacy) to a new number.
LCD Display
,
The LCD Display gives you the following information:
l
time and date when the set is idle
l
softkey labels during programming and feature access
l
call status during telephone calls
l
message information
9 telephone system error messages.
Softkeys and SUPERKEY
Immediately below the LCD are three unlabeled blue softkeys. Their functions are
defined by corresponding prompts displayed on the LCD. The softkeys are used during
telephone operations to perform functions or to access system features. The keys'
functions vary with the activities of the set. The SUPERKEY is a fixed function key,
which is located at the bottom left side of the set. When the SUPERKEY is pressed, the
softkeys take on new meanings associated with user programming functions.
tine Appearance Keys
There are 12 Line Appearance keys arranged in two columns. For CDE purposes
these keys are numbered from bottom to top, right to left, from1 to 12. The first Line
Appearance Key is always programmed as the Prime Line. The liquid crystal display
(LCD) indicator provides the status of each Line Appearance.
These keys may be programmed to access specific lines and specific PABXfeatures.
These keys can be designated during CDE or they can be programmed from the set;
refer to 9109-096-l 05NA, Features Description.
Speed Call Keys
Any unused Line Appearance key may also be programmed as a personal Speed Call
key. This can be done by the user from the SUPERSfl420.
Ringer Pitch Adjustment
Ringer pitch and cadence combination adjustment is one of the
SUPERSET 420
telephone's built-in functions. To adjust:
l
Press SUPERKEY,
. Press the MORE... softkey.
l
Press the RING ADJUST softkey.
l
Press the RINGER PITCH softkey.
l
The set will start ringing.
9109-096-l 26-N/4 Issue 1 Revision 0
126 12-7