Mitel SX-200 Practices page 1155

m .
DATASET 1100 Series Descrbtion
.WO@ DIGITAL PABX
DNIC LINE CARD
12 PmTs/cARD
TERMINAL OR PC
SWERSE74mDNORSUPERSET3mDN
TELEPHONB WITH DATAFin 1lOl
CARTRIDGE
Figure 14-2 Typical DATASET 1101 Cartridge Application
DATASET 1102 Dual Rack Mounted Card Description
14.5 A DATASET I 102 Dual Rack Mounted card contains two DATASETs mounted on a
common printed circuit board; it has LEDs on its front panel, but no switches or keys
for manual operation. Each DATASET 1102 Dual Rack Mounted card, which is
installed in a DATASHELF 9100 in a DATACABINET 9000, interfaces to a PABX
Digital Line Card circuit through a single pair. The DATASHELF 9100 connects to the
PABX through a 2%pair cable; each card slot is assigned one of these pairs
Figure 14-3 shows a DATASET I 102 Dual Rack Mounted card. The card measures
254 mm x 190 mm (10 in. x 7.45 in.).
Its primary function is to interface between a host computer and the PABX; DATASET
I 101 Cartridges or Standalone DATASET I 103 sets distributed throughout the complex
access the DATASET II 02 Dual Rack Mounted cards through the PABX. The
DATACABINET 9000, in which the DATASHELF 9100 and the DATASET 1102 Dual
Rack Mounted cards are mounted, is usually located within a computer room.
Indicators and Connectors
Six LEDs are on the front of the DATASET II 02 Dual Rack Mounted card:
- DEVICE I (DTR) - DC1 in CDE
- READY I - DC1 in CDE
- DWlCE2 (DTR) - DC2 in CDE
- READY 2 - DC2 in CDE
9109-096-126-NA
Issue 1
Revision 0 126 1445