Mitel SX-200 Practices page 1082

Peripheral Devices
Table 5-2 Installer Loop Test Routines
Step
Action
Verification Notes
Accessing Test Routines
1.
Go off-hook (handset or handsfree).
Dial tone returned.
21 Diat Loop Test Access Code.
Line status display indicates line busy at 1, 2.
this set.
'TEST! PRESS KEYS" displayed,
;
\
Keypad Test
3.
Press keys l-9, *, 0, and # in turn.
DTMF tones are heard through
handset or speaker. A 2-digit number is
displayed as follows:
Key
Number
Pressed Displayed
1 01
2 02
3
03
4 04
5 05
6 06
7 07
8 08
9 09
*
10
ii
00
11
4.
Supplementary Feature Keys Test
Press the "display", "select features",
A 2-digit number is displayed as
"speaker on/off', and "mic. on/off" keys
follows:
in turn.
W
Number
Pressed
Displayed
display 12
select features 13
speaker on/off 14
mic. on/off
15
3.
4.
5.
5.
6.
Feature Select Keys and Features Display Test
Press each of the feature select
The prompts above each key are 6.
(unmarked) keys in turn.
activated, and a 2-digit number is
displayed (see Figure 5-6 ).
Press the "select features" key.
Supplementary feature names are 7.
actiiated (see Figure 5-6).
Page 1 of 2
126 5-12
Revision 0
9109-096-l 2mA
Issue 1