Mitel SX-200 Practices page 1068

Peripheral Devices
sWHZSW3 Telephone Installation Instructions
Installation includes unpacking the set, assembling the set and connecting the set to
a wall jack. The connections to the system via the cross connect field are described
in Practice 9109-096-200-NA, Installation Information.
Any connection of this set to an off premise application, an out of plant appiica-
tion, or to any other exposed plant application may result in a safety hazard,
and/or defective operation, and/or equipment damage.
Do not use a hand-telephone test set (butt set) to check a
SUPERSET 3
iihe.
The interface card has no loop detector. Set on-hook / off-hook status is sig-
naled by data transmission.
Do not connect SURERSET telephones to standard lines, in parallel, or as power fail
transfer extensions.
Before the set can be used, the system must be programmed and equipped with
six-circuit COV Line cards, or eight-circuit SUPERSET Line cards to interface with a
SUPEMET3 telephone. Refer to Practice 9109-096-210-NA, Customer Data Entry.
Step
1.
2.
3.
4.
5.
6.
Chart 4-l
SUPERSET
3 Telephone installation instructions
Action
Place the
SUPERSET 3
telephone in its assigned position,
Connect the handset cord to the handset and main assembly.
Wriie the user's telephone number on the Number Identification Card.
Identify the set's extension number, other line appearances and features on the
Line Identification Card.
Install the Number Identification Card, the Line Identification Card, and their proteotive
lenses onto the main assembly.
Connect the line cord to the telephone and the telephone iack.
Table 4-l
SUPERSET 3 Telephone Environmental Specifications
Operating Environment:
Temperature:
Humidity:
Storage/Shipping Environment:
Temperature:
Humidity:
0' to
50'
C
(32'
to 122' F).
5% to 95% RH, non-oondensing.
-40° to
66O
c (-40° to 1 5o" F).
5%
to 95% RH, non-condensing.
-1
126 4-6 Revision 0 9109096-126NA issue 1