Mitel SX-200 Practices page 1109

Em .
SUPERSET DSS Module
Step
3.
s'
\
4.
5.
Chart 8-l Install a SUPERSET DSS Module
(continued)
Action
To secure a Digital SUPERSfltelephone to the
SUPERSET DSS Module, place the Coupling
DSWBLF Unit beneath and between them, with two
rubber feet of the telephone and two rubber feet of
the set securely placed into the holes in the Coupling
DSS/BLF unit.
At the distribution frame, cross connect the cable
from the modular jack of the SUPERSET DSS
Module to the cable from the associated Digital Line
Card. Refer to Figure 64
Program the keys and lamps of the SUPERSET DSS
Module in CDE.
9109-09&126-NA Issue 1
Revision 0
Comments
The Coupling DSS/BLF unit is op-
tional; it is not used with the Con-
sole.
.
Refer to the Installation Manual for
wiring information for the
SUPERSET DSS Module modular
jack.
Refer to the system programming
manual.
Page 2 of 2
126 6-5