Mitel SX-200 Practices page 1129

m .
SUPERSET 410 Telephone
Wall-Mounting the SUPERSET 410 Telephone
Wall-Mounting Instructions
II .5 To wall-mount the SUR!3?SE7410 telephone reverse the detachable base and plug
the line cord into a modular jack. The "cord winder" in the base stores extra cord (See
Figure 11-4). The complete wall-mounting instructions can be ordered through
normal distribution channels.
Visual Indication of System Communications Problems
,
\
II .6 If there is either a synchronization or communication error, the Message Lamp and
the Microphone Lamp flashes at double the "Message Waiting" rate,
Connection to the Milink Data Module
I I .7 To accommodate data call operations the SUPERSET is equipped with a MiLink
network connection, This allows the set to be connected to a /Ni& Data Module on
the desktop using only one telephone port. For MiLink Data Module installation
instructions see Section 14, Dataset I 100 Series in this Practice.
9109-096-l 26-NA Issue 1 Revision 0 126 11-9