Mitel SX-200 Practices page 1149

SLJPERSET 430
Telephone
Table 13-I SUPERSET43OTelephone Environmental Specifications
Operating Environment:
Temperature:
Humid@:
6torageBhipping Environment:
Temperature:
Humidity:
0' to 35" C (32' to 95' I=).
0% to 90% RH, non-condensing.
-25' to 70' C (-13 to 158'= t=).
0% to 90% RH, non-condensing.
;
Visual Indication of System Communications Problems
13.5 If there is a synchronization error, the LCD displays "NO SYNCHRONIZATION" in the
uppermost row of the display. If there is a communication error, the display reads
"NO COMMLJNICATION". If the SUPERSf T 430 is installed on a circuit that is not
programmed in CDE as a
SUPERSET
430 the message '?NVALlD SET TYPE" and
"CHECK CDE" will appear on the first two lines of the display.
Connection to the MiWnk DATASET
13.6 To accommodate data call operations the
SUPERSET
430 telephone is equipped
with a
MiLink
network connection. This allows the set to be connected to a
MiLink
Data Module on the desktop using only one telephone port. For
MiLink
Data Module
installation instructions see Section 14, Dataset 1100 Series in this Practice.
9109-096-l 26-NA
Issue l Revision 0