Errormessages - Mitel SX-200 Practices

SUPERSET 4
Description
Table 5-l SUPEf?SE~4Telephone Environmental Specifications
Operating Environment:
Temperature:
Humidity:
Storage/Shipping Environment:
Temperature:
Humidity:
O'= to 50' C (32O to 122' F) .
5%
to 95% RH, non-condensing.
-40° to 66O
c (-40° to 1 5o" F),
5% to 95% RH, non-condensing.
Wall-Mounting the SLPBSEU Telephone
Wall-Mounting Instructions
5.5
SUFFRSET4 telephone may be attached to a wall-mount assembly and plugged
into a modular wall jack. The wall-mount assembly can be ordered through normal
distribution channels.
Error Messages
5.6 The data transfer between a SUP,!ZRSET4 telephone and the system is monitored
continuously. Any problems cause an error message to be displayed by the
alphanumeric display as follows:
Message: NO COMMUNICATION
Meaning:
This is displayed when data transfer has not occurred for at least I
second. The set is not operational in this condition, and any set displaying this
message should be reported by the user. When the problem has been corrected
(refer to appropriate PABX Maintenance Documentation), the error message is
cleared, time and date are displayed, and the set becomes operational,
Message: CONSECUTIVE ERRS
Meaning:
This is displayed when a series of data transfer errors has been
detected by the host PABX. If the error occurs during a call, the audio may be
lost, and the features become inoperative. If the error occurs while the set is idle,
no calls can be made or received at the set. This error may be transient in nature
and may disappear. When the error is cleared (refer to appropriate PABX
Maintenance Documentation), time and date are redisplayed and the set
becomes operational.
9109-096126-NA
Issue 1 Revision 0 126 5-9