Featuresdisplay - Mitel SX-200 Practices

Peripheral Devices
The actual feature to be displayed is selected after the DISPLAY key is pressed, by
either pressing a line select/speed call key (for line identification, caller identification,
or speed call number) or pressing a softkey under the prompt associated with the
feature. To clear the display, press the EXIT softkey,
SELECT FEATURES. Features which may be activated at any time, as opposed to
those which may be selected only at fixed times, are displayed on the features display
when the SELECT FEATURES key is pressed. The features which can be selected
(e.g:, Do Not Disturb) are displayed adjacent to the alphanumeric display. The
alphanumeric display instructs the user to "DIAL FEATURE NO.", which is a reference
to the number adjacent to the name of the feature in the features display. To select the
,feature, the user dials this number from the keypad.
SPEAKER ON/OFF. This key allows the set user to receive or originate calls without
the use of the handset. Pressing the key once switches the speaker and microphone
ON and selects the prime line. Each time this key is pressed, the speaker and
microphone are switched alternately ON and OFF, and the set is switched between
on-hook and off-hook conditions. While the microphone is ON, avisual reminder (MIC
ON) is displayed on the features display.
MIC ON/OFF. This key is used to switch the microphone OFF during handsfree
operation, in order to either prevent transmission of local sound, or improve reception
when the set is installed in a noisy environment. While the microphone is ON, a visual
reminder ( MIC ON ) is displayed on the features display.
Features Display
This is a liquid crystal display mounted adjacent to the feature keys. The features
display is divided into three functional areas.
FEATURES DISPWY AREA. The words displayed in this area indicate the features
that may be selected at any time. Those features which are not in the Class of Service
are not displayed. Display of the words is initiated by pressing the DISPLAY
FUTURES key.
The meaning of each feature name is as follows:
1 :FWD Call Forward.
This feature is automatically invoked after setting up type and destination. To
cancel the feature, the user must press the SELECT FEATURES key, dial 'I',
and then press the OFF feature key. To reactivate the feature, the user must
press the SELECT FEATURES key, dial '1 ', and then press the ON feature key.
When active, the word FWD is displayed as a reminder.
2:N0 DIST'B Do Not Disturb.
This feature prevents an incoming call from ringing the user's set. To activate,
the user must press the SELECT FEATURES key, dial '2', and then press the
ON feature key. To cancel this feature, the user must press the SELECT
FEATURES key, dial '2', and then press the OFF feature key. When active, the
words NO DIST'B are displayed as a reminder.
126 5-4
Revision 0 9109-096-l 26-NA Issue 1