Mitel SX-200 Practices page 1106

Peripheral Devices
The SUPERSET DSS module has 32 keys arranged in two vertical rows. An LCD
beside each key shows the current status of the line represented by that key. The DSS
module can be used as a stand alone device or, through CDE programming, up to two
DSS modules can be associated with each of the following devices:
l
SUPERSET 4 telephone
l
SUPERSET 3 telephone
l
SUPERSET 4 DN telephone
l
SUPERSET 3 DN telephone
l
\
SUPERSET 410 telephone
l
SUPERSET 420 telephone
l
SUPERSET 430 telephone
l
LCD attendant console
9 SUPERCONSOLE 1000 attendant console
Figure 8-2 shows a SUPERSET DSS module with a SUPERSET DN telephone,
--- - .-- - -.-----
nil
OOOD
n n n
Figure 8-2
SUPERSET DSS
with
SUPERSET
DNTelephone
As a stand alone device, the SUPERSETDSS module can only be used as a busy lamp
field, showing device status only.
If the module is associated with any of the devices listed above, it can be used as a BLF
to indicate line status, and a DSS, allowing access to these devices with a single key
press, The keys can also be used to access features in the same manner as line select
keys on a SUPERSfltelephone and to provide additional speed call keys.
The SUPERSET DSS module is a DNIC device and connects to one DNIC port on a
DNI Line Card. Refer to Appendix A.
126 6-2 Revision 0
9109-096-l 26-NA Issue 1