Replacing The Rear Two Hard-Disk-Drive Kit - Lenovo System x3650 M5 Installation And Service Manual

Figure 146. 3.5-inch rear two hard-disk-drive kit removal

Replacing the rear two hard-disk-drive kit

Use this information to replace the rear two hard-disk-drive kit on the system board.
Notes:
1. Refer to the following rules before you install the rear two hard-disk-drive kit.
• 2.5-inch hot-swap hard disk drive model
– Supports one 2.5-inch rear two hard-disk-drive kit, or
– Supports two 2.5-inch rear two hard-disk-drive kits
• 3.5-inch hot-swap hard disk drive model
– Supports one 2.5-inch rear two hard-disk-drive kit, or
– Supports one 3.5-inch rear two hard-disk-drive kit, or
– Supports one 2.5-inch rear two hard-disk-drive kit and one 3.5-inch rear two hard-disk-drive kit
2. Refer to the following rules for the rear two hard-disk-drive kit numbering.
• 2.5-inch hot-swap hard disk drive model
– One 2.5-inch rear two hard-disk-drive kit numbering
28
29
Figure 147. One 2.5-inch rear two hard-disk-drive kit numbering
– Two 2.5-inch rear two hard-disk-drive kits numbering
3.5-inch rear two
hard-disk-drive kit
SATA/SAS hard disk drive bays
Chapter 5
.
Installing, removing, and replacing components
219