Replacing The Front Usb Assembly - Lenovo System x3650 M5 Installation And Service Manual

Figure 86. Front USB assembly removal
Step 6. If you are instructed to return the front USB assembly, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.

Replacing the front USB assembly

Use this information to replace the front USB assembly.
Note: The front USB assembly is available only on some models.
To install the front USB assembly, complete the following steps.
Step 1. Read the safety information that begins on "Safety" on page v and "Installation guidelines" on page
305.
Step 2. Turn off the server and peripheral devices and disconnect the power cords and all external cables,
if necessary.
Step 3. Remove the top cover (see "Removing the top cover" on page 162).
Step 4. Align and slide the front USB assembly into the server until it clicks into place.
Figure 87. Front USB assembly installation
Step 5. Connect the cable on the front USB assembly to the system board.
The following illustration shows the cable routing for the front USB assembly.
170
Lenovo System x3650 M5 Installation and Service Guide
1
2
Front USB assembly Release latch
Front USB assembly