Lenovo System x3650 M5 Installation And Service Manual page 229

Figure 143. Shipping bracket removal
Step 6. Align the battery/flash power module with the slot and push the battery into the battery/flash power
module holder and make sure that the holder retains the battery/flash power module securely.
Raid adapter battery /
flash power module
Figure 144. RAID adapter battery/flash power module installation
Step 7. Connect the battery/flash power module cable to the RAID adapter battery/flash power module
connector.
Attention: Make sure that the cable is not pinched and does not cover any connectors or obstruct
any components on the system board.
Step 8. Reinstall the riser-card assemblies if you have remove them. See "Replacing an adapter in a riser-
card assembly" on page 207.
Attention:
1. Make sure that the cable is not pinched and does not cover any connectors or obstruct any
components on the system board.
Shipping brackets
Air baffle
Air baffle
.
Chapter 5 Installing, removing, and replacing components
217