Replacing An Optical Drive - Lenovo System x3650 M5 Installation And Service Manual

Hide thumbs Also See for System x3650 M5:
Table of Contents

Advertisement

Figure 101. Optical drive removal
Step 5.
Slide the drive retention clip from the side of the drive. Save the clip to use when you install the
replacement drive or replace the optical drive filler panel.
Drive retention clip
Alignment pins
Figure 102. Optical drive retention clip removal
Step 6.
Attach the drive retention clip to the side of the optical drive filler panel that you removed.
Step 7.
Slide the optical drive filler panel into the optical drive bay until the optical drive filler panel clicks
into place.
Step 8.
If you are instructed to return the optical drive, follow all packaging instructions, and use any
packaging materials for shipping that are supplied to you.

Replacing an optical drive

Use this information to install an optical drive.
The following notes describe the type of drives that the server supports and other information that you must
consider when you install a drive. For a list of supported drives, see
• You can go to "Front view" on page 18 to see the locations of an optical drive on the server.
• Locate the documentation that comes with the drive and follow those instructions in addition to the
instructions in this chapter.
• Make sure that you have all the cables and other equipment that are specified in the documentation that
comes with the drive.
• The server supports one ultra-slim SATA optical drive.
180
Lenovo System x3650 M5 Installation and Service Guide
Release tab
1
2
http://www.lenovo.com/ serverproven/
.

Advertisement

Table of Contents
loading

Table of Contents