Replacing An Optional Serveraid Adapter Memory Module - Lenovo System x3650 M5 Installation And Service Manual

Step 3. Remove the top cover (see "Removing the top cover" on page 162).
Step 4. Locate the ServeRAID adapter with the ServeRAID adapter memory module installed. Then remove
any parts and disconnect any cables that might impede your access to the ServeRAID adapter
memory module.
Step 5. Pivot the retaining clips outward. Then grasp the ServeRAID adapter memory module by its edges
and carefully pull it straight up to remove it from the memory module slot on the ServeRAID
adapter.
Figure 240. ServeRAID adapter memory module removal
Step 6. If you are instructed to return the ServeRAID adapter memory module, follow all packaging
instructions, and use any packaging materials for shipping that are supplied to you.

Replacing an optional ServeRAID adapter memory module

Use this information to replace an optional ServeRAID adapter memory module.
To replace an optional ServeRAID adapter memory module, complete the following steps.
Step 1. Read the safety information that begins on "Safety" on page v and "Installation guidelines" on page
305.
Step 2. Turn off the server, and disconnect all power cords and external cables.
Step 3. Remove the top cover (see "Removing the top cover" on page 162).
Step 4. Locate the ServeRAID adapter onto which you want to install the ServeRAID adapter memory
module. Then remove any parts and disconnect any cables that might impede your access to the
ServeRAID adapter.
Step 5. Touch the static-protective package that contains the ServeRAID adapter memory module to any
unpainted metal surface on the server. Then remove the ServeRAID adapter memory module from
the package.
Step 6. Align the ServeRAID adapter memory module with the memory module slot on the ServeRAID
adapter. Then press the memory module straight down into the slot until the memory module snaps
into position. Ensure that the memory module is firmly seated.
.
Chapter 5 Installing, removing, and replacing components
283