Lenovo System x3650 M5 Installation And Service Manual page 341

Step 6. Install the new backplanes. (See "Replacing the 2.5-inch simple-swap backplate assembly/hot-
swap hard disk drive backplane" on page 259).
Step 7. Connect the power/configuration and signal cables to the backplane.
• 8x 2.5-inch HDD + 4x 2.5-inch NVMe PCIe SSD
Signal cable
Figure 293. Cable connections
• 8x 2.5-inch HDD + 8x 2.5-inch NVMe PCIe SSD
Signal cable
Figure 294. Cable connections
• 16x 2.5-inch HDD + 4x 2.5-inch NVMe PCIe SSD
2.5-inch NVMe backplane
Power / configuration cable
2.5-inch HDD hot-swap backplane
SAS signal cable
2.5-inch NVMe backplane
Power / configuration cable
2.5-inch NVMe backplane
Signal cable
SAS signal cable
Power / configuration cable
Power / configuration cable
2.5-inch HDD hot-swap backplane
Power / configuration cable
.
Chapter 5 Installing, removing, and replacing components
329