Lenovo System x3650 M5 Installation And Service Manual page 223

Hide thumbs Also See for System x3650 M5:

Table of Contents

Rotate the retention latch to the close position.

Note: Fasten the screw on the retention latch to secure the adapter.

If you are installing a full-height, full-length adapter, insert the shipping brackets.

PCI riser assembly

Figure 137. Full-height, full-length adapter

Step 10. Connect any required cables to the adapter.

• When you route cables, do not block any connectors or the ventilated space around any of the

• Make sure that cables are not routed on top of components that are under the riser-card

• Make sure that cables are not pinched by the server components.

Step 11. Align the riser-card assembly with the selected PCI connector on the system board and align it with

the slots on the chassis; then, lower it into the server and press down firmly until the riser-card

assembly is seated correctly in the connector on the system board.

• For half-length and low profile adapters

Shipping bracket

Installing, removing, and replacing components

Troubleshooting