Installing A 4X 2.5-Inch Nvme Pcie Ssd Upgrade Kit - Lenovo System x3650 M5 Installation And Service Manual

Power / configuration
cable (150 mm)
BP1
Figure 291. Cable connections
Step 10. If you removed the fan cage assembly, install it. (See "Replacing the fan cage assembly" on page
191).
Step 11. Insert the hard disk drives and the fillers the rest of the way into the bays.
Step 12. Install the top cover (see "Replacing the top cover" on page 164).
Step 13. Slide the server into the rack.
Step 14. Reconnect the power cords and any cables that you removed.
Step 15. Turn on the peripheral devices and the server.

Installing a 4x 2.5-inch NVMe PCIe SSD upgrade kit

Use this information to install a 4x 2.5-inch NVMe PCIe SSD upgrade kit.
To order a 4x 2.5-inch NVMe PCIe SSD upgrade kit, contact your sales representative or reseller.
The 4x 2.5-inch NVMe PCIe SSD upgrade kit contains the following components:
• Four signal cables
• One power/configuration cable
• One backplane assembly
To support the NVMe PCIe SSD upgrade kit, your server must meet the following requirements:
324
Lenovo System x3650 M5 Installation and Service Guide
SAS signal cables
(580 / 590 mm)
Power / configuration
cable (220 mm)
SAS 0 SAS 1
SAS signal cables Power / configuration
(250 mm) cable (220 mm)
BP1
SAS 0 SAS 1