Media cage
Figure 222. LCD system information display panel removal
9. If you are instructed to return the LCD system information display panel, follow all packaging
instructions, and use any packaging materials for shipping that are supplied to you.
Replacing the LCD system information display panel
Use this information to replace the LCD system information display panel.
Note: The LCD system information display panel is available on some models.
Replacing the LCD panel assembly on a 3.5-inch model
To install the LCD panel assembly on a 3.5-inch model, complete the following steps.
1. Read the safety information that begins on "Safety" on page v and "Installation guidelines" on page 305.
2. Turn off the server and peripheral devices and disconnect the power cords and all external cables, if
necessary.
3. Remove the top cover (see "Removing the top cover" on page 162).
4. Remove the fan cage assembly "Removing the fan cage assembly" on page 190).
5.
1
Pull the tab on the LCD retention bracket to the left to disengage the retention bracket.
retention bracket to remove it from the server.
1
2
Figure 223. Retention bracket removal
6. Carefully insert the LCD system information display panel into place.
LCD system information
display panel
Retention bracket
.
Chapter 5
Installing, removing, and replacing components
2
Rotate the
273