16x2.5-inch drive model
The internal routing for the 16x2.5-inch drive model cables.
The following illustration shows the internal routing for the 16x2.5-inch drive model cables.
Note: There might be 3 or 4 power connectors on the system board depending on your configuration.
However, this difference will not affect the cable routing. Follow the following illustrations to complete your
cable routing.
16x2.5-inch simple-swap hard disk drive model
Figure 62. 16x2.5-inch simple-swap hard disk drive with hardware RAID cabling
.
151
Chapter 5
Installing, removing, and replacing components