Removing The System Board - Lenovo System x3650 M5 Installation And Service Manual

Step 1. Read the safety information that begins on "Safety" on page v and "Installation guidelines" on page
305.
Step 2. Turn off the server and peripheral devices and disconnect the power cords and all external cables.
Step 3. Remove the top cover (see "Removing the top cover" on page 162).
Step 4. Remove the air baffle (see "Removing the air baffle" on page 165).
Step 5. Align the retention module with the holes on the system board.
Step 6. Use a screwdriver to reinstall the four screws.
Figure 267. Heat-sink retention module installation
Step 7. Reinstall the heat sink (see "Replacing a microprocessor and heat sink" on page 289).
Attention: Make sure that you install each heat sink with its paired microprocessor.
Step 8. Reinstall the air baffle (see "Replacing the air baffle" on page 166).
Step 9. Install the top cover (see "Replacing the top cover" on page 164).
Step 10. Slide the server into the rack.
Step 11. Reconnect the power cords and any cables that you removed.
Step 12. Turn on the peripheral devices and the server.

Removing the system board

Use this information to remove the system board.
Notes:
1. When you replace the system board, you must either update the server with the latest firmware or
restore the pre-existing firmware that the customer provides on a diskette or CD image. Make sure that
you have the latest firmware or a copy of the pre-existing firmware before you proceed.
2. When you replace the system board, make sure that you remove the Integrated Management Module
Advanced Upgrade and place it on the new system board. For information about the Advanced
Upgrade, see "Using the remote presence and blue-screen capture features" on page 57.
3. Before you replace the system board, make sure that you back up any features on demand (FoD) keys
that were enabled. Reactivate any Features on Demand features. Instructions for automating the
activation of features and installing activation keys is in the Features on Demand User's Guide. To
download the document, go to
Heat sink retention module
https://fod.lenovo.com/lkms
, log in, and click Help.
.
Chapter 5 Installing, removing, and replacing components
299