How To Send Dsa Data - Lenovo System x3650 M5 Installation And Service Manual

1. After you have confirmed that the server starts correctly and recognizes the newly installed devices and
that no error LEDs are lit, run the Dynamic System Analysis (DSA) stress test. For information about
using DSA, see "Dynamic System Analysis" on page 79.
2. Shut down and restart the server multiple times to ensure that the server is correctly configured and
functions correctly with the newly installed devices.
3. Save the DSA log as a file and send it to Lenovo. For information about transferring data and logs, see
"How to send DSA data" on page 337.
4. To ship the server, repackage it in the original undamaged packing material and observe Lenovo
procedures for shipping.
Support information for Business Partners is available at

How to send DSA data

You can use the Enhanced Customer Data Repository to send diagnostic data to IBM.
Before you send diagnostic data to IBM, read the terms of use at
terms.html .
You can use any of the following methods to send diagnostic data:
• Standard upload:
http://www.ibm.com/de/support/ ecurep/send_http.html
• Standard upload with the system serial number:
http://www.ecurep.ibm.com/app/ upload_hw
• Secure upload:
http://www.ibm.com/de/support/ ecurep/send_http.html#secure
• Secure upload with the system serial number:
https://www.ecurep.ibm.com/ app/upload_hw
http://www.ibm.com/partnerworld
http://www.ibm.com/de/support/ ecurep/
.
Chapter 5 Installing, removing, and replacing components
.
337