Lenovo System x3650 M5 Installation And Service Manual page 284

9. If you are instructed to return the LCD panel assembly, follow all packaging instructions, and use any
packaging materials for shipping that are supplied to you.
Removing the LCD system information display panel on a 2.5-inch model
To remove the LCD system information display panel inside the media cage on a 2.5-inch model, complete
the following steps.
1. Read the safety information that begins on "Safety" on page v and "Installation guidelines" on page 305.
2. Turn off the server and peripheral devices and disconnect the power cords and all external cables, if
necessary.
3. Remove the top cover (see "Removing the top cover" on page 162).
4. Remove the fan cage assembly "Removing the fan cage assembly" on page 190).
5. Remove the media cage (see "Removing the media cage (also called lightpath LCD operation panel
assembly)" on page 194),
6. Disconnect the cable from the back of the LCD system information display panel.
Note: To disconnect the cable, press evenly on the connector release latch first; then, pull the cable out.
7. 1 Pull the tab on the LCD retention bracket to the left to disengage the retention bracket.
retention bracket to remove it from the server.
1
Media cage
Figure 221. Retention bracket removal
8. Carefully remove the LCD system information display panel out of the media cage.
272
Lenovo System x3650 M5 Installation and Service Guide
Retention bracket
2
2 Rotate the