Installing A Pcie Thermal Solution Kit - Lenovo System x3650 M5 Installation And Service Manual

Power connector 3
Power connector 2
Power connector 1
Figure 299. Cable routing
Notes:
1. For the power cable connection, the NVMe backplane can only connect to the power
connector 3.
2. There might be 3 or 4 power connectors on the system board depending on your
configuration. However, this difference will not affect the cable routing. Follow the following
illustrations to complete your cable routing.
Step 14. If you removed the fan cage, install it back to the server. (See "Replacing the fan cage assembly"
on page 191).
Step 15. Insert the hard disk drives and the fillers the rest of the way into the bays. (See "Replacing a hot-
swap hard disk drive" on page 172).

Installing a PCIe thermal solution kit

Use this information to install a PCIe thermal solution kit.
Note: If you are installing the Dual Port 10GB-T Ethernet Daughter Card (Option number is 00D1994) in the
server, you have to purchase and install a Lenovo System x3650 M5 PCIe thermal solution kit. See
www.lenovo.com/ serverproven/
contact your sales representative or reseller.
The PCIe thermal solution kit contains one air baffle.
334
Lenovo System x3650 M5 Installation and Service Guide
for a list of supported optional devices. To order a PCIe thermal solution kit,
Signal cables
http://