Replacing The Security Bezel; Removing An Optional Serveraid Adapter Memory Module - Lenovo System x3650 M5 Installation And Service Manual

2
1
Release latch
Figure 238. Security bezel removal
Step 4. If you are instructed to return the security bezel, follow all packaging instructions, and use any
packaging materials for shipping that are supplied to you.

Replacing the security bezel

Use this information to replace the security bezel.
To replace the security bezel, complete the following steps:
Step 1. Read the safety information that begins on "Safety" on page v and "Installation guidelines" on page
305.
1
Step 2. Carefully insert the right end of the security bezel into the slots along the right side of the chassis.
2
Step 3. Rotate the security bezel until the other side clicks into place on the chassis.
2
Figure 239. Security bezel installation
Step 4. Use the key to lock the bezel if required.

Removing an optional ServeRAID adapter memory module

Use this information to remove an optional ServeRAID adapter memory module.
To remove an optional ServeRAID adapter memory module, complete the following steps.
Step 1. Read the safety information that begins on "Safety" on page v and "Installation guidelines" on page
305.
Step 2. Turn off the server, and disconnect all power cords and external cables.
282
Lenovo System x3650 M5 Installation and Service Guide
Security bezel
Security bezel
1