Adjusting The Lens File Data - Sony BVP-900 Series System Manual

5-4-2 Adjusting the Lens File Data

You can change the compensation data of the lens file
for the mounted lens.
To operate from the MSU-700A/750
Operating Procedure
1
Press the FILE button.
The File Control Menu appears on the display.
2
Press [Lens File] on the File Control Menu.
The Lens File operation menu appears.
3
Turn the lens extenter off.
4
Perform White Auto Setup (page 4-98) by pressing
[White] to determine the referenece values for the
selected lens extender position.
5
Press [Adjusting].
(To return to the File Control Menu, press [Exit].)
The Lens file adjusting menu now appears.
Pressing [Auto Iris] selects the Auto Iris adjustment
display (page 4-43), pressing [Flare] selects the
Flare adjustment display (page 4-62). Perform the
adjustments as required.
Note
Before changing the file data, press the STANDARD
button on the MSU-700A/750 or the RCP-series panels
to set the camera to the standard settings.
1
Auto Iris
(Continued)
File Control Menu
MODE
File Control Menu
Refer- Scene
Lens File OHB File
ence File
MULTI
CARD
CONFIG
MAINTENANCE
FILE
PAINT
Menu operation block (Example: MSU-700A)
Lens File operation menu
Lens File
Lens
Lens
Select
Store
Auto
White
Lens file adjusting menu
Clear
V Mod
Flare
Saw
Chapter 5 File Operations
2
Exit
Adjusting
Exit
1
1
5-15