Attaching The Number Plate - Sony BVP-900 Series System Manual

2-1 Mounting the Video Camera

2-1-4 Attaching the Number Plate

Number plates are supplied with the BVP-900/900P,
CCU-700A/700AP/550A/550AP, BVF-7700/7700P/
77/77CE/55/55CE, and CA-905F/905K to indicate the
camera number. Attach the number plates to the tally
lamps or camera number indicator on each unit.
Attaching to the BVP-900/900P
Attach the number plates supplied with the BVP-900/
900P to the up tally lamp and camera number
indicators as follows:
Cream-colored plates: for the camera number
indicator on the side panels
Large white plates: for the up tally lamp
Small white plates: for the back tally lamp
Insert the projections on both sides of the number plate
to the grooves of the tally lamp or camera-number
indicator.
Groove
Attaching the number plate
2-24
Chapter 2 Setup
Up tally lamp
Camera
number
indicator
Back tally
lamp
Number plate
Attaching to the viewfinder
Attach the number plates supplied with the BVF-7700/
7700P/77/77CE/55/55CE viewfinder with the same
manner as the BVP-900/900P.
Attaching to the CA-905T
Attach the number plate supplied with the CA-905
large lens adaptor with the same manner as the BVP-
900/900P.
Attaching to the CCU-700A/700AP/550A/
550AP
Attach the number plates supplied with the CCU-
700A/700AP/550A/550AP to the tally lamp as shown
below.
1
Remove the lamp cover.
Lamp cover
2
Attach the number plate between the lamp cover
and diffusion sheet.
1
Number plate
Lamp cover
Transparent cover
Diffusion sheet
Transparent cover
Diffusion sheet