Character Display - Sony BVP-900 Series System Manual

6-1 Display on the Viewfinder Screen of the BVP-900/900P
Safety zone
Set the SAFETY ZONE switch to ON. A frame
(safety zone) to indicate 90% of the picture being shot
with the camera appears on the viewfinder screen.
You can change the frame size to 80% on the VF
Setup 2 display.
For details, see "6-1-3 Operation Menu."
Safety zone
Zoom indicator
A zoom indicator to show the zoom position appears
on the viewfinder screen. Two types of indicator are
available, and you can select the type on the VF Setup
1)
2 display.
For details, see "6-1-3 Operation Menu."
A
Zoom Indicator
..........................................................................................................................................................................................................
1) On the BVP-700/700P that is upgraed with the BKP-
7090/7090P, use the switch on the front panel of the MS-
37 board.
6-2
Chapter 6 Display
1)
B
Zoom Indicator

6-1-2 Character Display

The BVP-900-series video camera system shows the
operating conditions, adjustment items, adjusted
values, etc. on the viewfinder screen with characters.
R G B
POWER
2 3 4
FILTER LOCAL H-POSI V-POSI
1 5
ND
B C D WIDTH HEIGHT
A E
CC
SAFETY
CENTER
ZONE UP TALLY MIX VF DISPLAY MENU SELECT
MARKER
ON ON ON ON ON
OFF
CANCEL ENTER
OFF OFF OFF OFF MENU
DISPLAY switch
Rear of the BVP-900/900P
Displaying the character data on the
viewfinder screen
Set the DISPLAY switch on the rear of the BVP-900/
900P to ON.
Automatic adjustment items and adjusted values, and
the items that are set to ON on the VF Setup 1 display
appear.
0dB
z0 ND: 1 F : 3 6 .
Turning the character display OFF
Set the DISPLAY switch on the rear of the BVP-900/
900P to OFF.
RET RET 1
RETURN
1
SELECT
2 3
1
4
STORE
CURSOR
1 2 3
ON
VF DETAIL PinP
ON POSITION
CALL
ON
OFF OFF
EVS 1 / 100 OF F
Ex C C :B
ON