Transferring The Reference File - Sony BVP-900 Series System Manual

5-6-4 Transferring the Reference File

The MSU-700A/750 permits you to store the reference
file in an IC card and load it to a camera from the card.
It is also possible to send the reference file from one
camera to other cameras.
One reference file can be stored in each card.
Use the Ref. Transfer Menu for transfer operations.
The following four kinds of transfer operations are
possible.
• To save the reference file of a camera to a memory
card
• To load the reference file from a memory card to a
camera
• To load the reference file from a memory card to
multiple cameras
• To send the reference file from one camera to other
multiple cameras
Notes
• When the Write-protect switch on the card is set to
ON, storing cannot be performed. Before a store
operation, be sure to set the switch to OFF.
• Sending the file to multiple cameras is possible only
among the cameras connected to the same CNU to
which the camera currently selected is connected.
<Examples>
When Camera 2 is selected in a system which is not
extended with the IF board of CNU: File transfer
is possible among Cameras 1 through 6.
When Camera 5 is selected in a system which is
extended with the IF board of CNU: File transfer
is possible among Cameras 1 through 12.
When Camera 17 is selected in a system which is
extended with the IF board of CNU: File transfer
is possible among Cameras 13 through 24.
• The file operating functions are not the same as those
of the cameras of other series (such as BVP-700-
series), and file transfer to/from cameras of other
series is not possible.
• The reference file loaded from a memory card or
transferred from another camera is not effective until
the Level Auto Setup is performed on the camera.
5-27
Chapter 5 File Operations