Sony BVP-900 Series System Manual page 246

To adjust from the RCP-730/731
Proceed as follows.
<
P o i n t
Paint
controls
WHITE BLACK GAMMA FLARE
DETAIL SKIN SKIN
DTL-1 DTL-2
KNEE/WHT button
KNEE POINT button
Master adjustment
1
Press the KNEE/WHT CLIP button of the paint
control block.
The master adjustment items (as shown in the
above figure) appear on the LCD display.
2
Adjust the master knee point with the left control
and the master knee slope with the center control.
The LED level markers around the controls light to
indicate the adjusted volume.
RGB adjustment
1
Press the KNEE POINT button of the paint control
block.
The LCD display serves the RGB knee point
adjustment.
<
K n e e P o i n t
R G
2
Adjust R, G, and B using the three controls.
>
M K n e e
S l o p e C l i p
KNEE / KNEE KNEE
WHT CLIP POINT SLOPE
BLK GAMMA MONO COLOR
/ SAT COLOR CORRECTOR
KNEE SLOPE button
>
B
3
Press the KNEE SLOPE button of the paint control
block.
The LCD display now serves the RGB knee slope
adjustment.
< S l o p e
K n e e
R G
4
Adjust R, G, and B using the three controls.
The LED level markers around the controls light to
indicate the adjusted volume.
Automatic adjustment of the knee
Using the AUTO SETUP block of the MSU-700A/
750, RCP-720/721/730/731/740/741, the knee slope
and point can also be automatically adjusted along
with black and gamma.
You can also exec ute this Level auto setup using the
Auto Setup menu of the MSU-700A/750.
For details, see "4-19 Auto Setup."
>
B
4-67
Chapter 4 Adjustments