Ccu-700A/700Ap - Sony BVP-900 Series System Manual

8-2-8 CCU-700A/700AP

General
Power requirements
CCU-700A 100 V AC, 50/60 Hz
CCU-700AP 110 to 120 V/220 to 240 V AC
selectable, 50/60 Hz
Current consumption
CCU-700A 450 VA max. for entire system
CCU-700AP 4 A max. for entire system
Cable length 2,000 m (6,560 feet) max.
(ø14.5 mm (
wide-band triax)
Operating temperature
5°C to 40°C (41°F to 104°F)
Dimensions (w/h/d) Approx. 424 × 133 × 400 mm
3
(16 /
Mass Approx. 18 kg (39 lb 11 oz)
Input connectors
REFERENCE INPUT
BNC type (1, with loopthrough
output)
VBS: 1.0 Vp-p, 75 ohms
RET 1, RET 2, RET 3, RET 4 INPUT
BNC type (1 each, with
loopthrough output)
1.0 Vp-p, 75 ohms
PROMPTER INPUT
BNC type (1, with loopthrough
output)
1.0 Vp-p, 75 ohms
⁄AC IN
3-pin (1)
DIGITAL RET 1, RET 2 INPUT
(with the BKP-7312 installed)
BNC type
D1-format serial digital signal
SMPTE 259M/ITU-R BT 656
Output connectors
VBS1, VBS2, VBS3 OUTPUT
BNC type (1 each)
VBS: 1.0 Vp-p, 75 ohms
R, G, B OUTPUT BNC type (1 each)
0.7 Vp-p, 75 ohms
19
/ inches)
32
× 5 × 15
1 3
/ / inches)
4 4 4
Y, R–Y, B–Y OUTPUT
BNC type (1 each)
CCU-700A Y: 1.0 Vp-p (video: 0.714, sync:
0.286), 75 ohms
R–Y: 0.7 Vp-p, 75 ohms
(75% CB)
B–Y: 0.7 Vp-p, 75 ohms
(75% CB)
CCU-700AP Y: 1.0 Vp-p (video: 0.7, sync:
0.3), 75 ohms
R–Y: 0.525 Vp-p, 75 ohms
(75% CB)
B–Y: 0.525 Vp-p, 75 ohms
(75% CB)
PIX OUTPUT BNC type (2)
1.0 Vp-p, 75 ohms
WF OUTPUT BNC type (2)
CCU-700A 0.714 Vp-p, 75 ohms
CCU-700AP: 0.7 Vp-p, 75 ohms
ENC: 1.0 Vp-p
SYNC OUTPUT BNC type (1)
0.3 Vp-p, 75 ohms, negative
MIC OUTPUT 1, 2
XLR 3-pin, male (1 each)
0 dBu/–20 dBu selectable with
the switch on the AT board
WF MODE 4-pin (1)
CHARACTER OUTPUT
BNC type (1)
video: 0.3 Vp-p
sync:
CCU-700A: 0.286 Vp-p
CCU-700AP: 0.3 Vp-p
DIGITAL OUTPUT 1, 2, 3
(with the BKP-7311 installed)
BNC type
D1-format serial digital signal
SMPTE 259 M/ITU-R BT 656
8-17
Chapter 8 Specifications