White Auto Setup - Sony BVP-900 Series System Manual

4-19 Auto Setup

4-19-2 White Auto Setup

The white balance is automatically adjusted.
To execute from the button on the MSU-
700A/750 or RCP-700-series panel
Operating procedure
1
Shoot a white pattern (which can be substituted
with white paper or wall).
A rectangle centered on the screen: length of sides are
80% the length and width of the screen.
2
Press and light the WHITE button.
White Auto Setup starts.
AUTO SETUP
SKIN DTL LEVEL
AUTO HUE
To cancel White Auto Setup
Press the lit WHITE button.
White Auto Setup is canceled, the button flashes, and
the original status is retrieved. When you press the
button again, it goes dark.
On the MSU-700A/750, RCP-720/721/730/731/740/
741, you can cancel White Auto Setup by pressing the
START/BREAK button.
4-98
Chapter 4 Adjustments
The white object must
be within the rectangle
and have an area of at
least 10% of the
screen.
Note
Make sure that there
are no bright spots
within the rectangle.
START/
BREAK WHITE BLACK
WHITE button
When White Auto Setup is completed
The WHITE button goes dark.
On the RCP-720/721/740/741, the adjustment mode of
the white balance/black balance control block is
automatically set to Relative mode.
To execute from the menu operation block
of the MSU-700A/750
Press [AWB] of the Black adjustment display (page
4-50).
You can also execute White Auto Setup using the Auto
Setup menu.
For the Auto Setup menu, see "4-19-7 Auto Setup With the
Auto Setup Menu."