Transferring The Scene Files - Sony BVP-900 Series System Manual

5-6 File Transfer
When loading is completed
The message "Completed" is displayed, and the
previous display is resumed.
If loading fails
The error message "<Load error> Retry?" is
displayed, and the camera select buttons of the
cameras for which the loading failed remain
displayed with a shaded background.
To retry the loading, press [Enter]. To cancel the
operation, press [CAM->CAMs] (now in inverse
video).
Example: The file is correctly loaded to Camera 13, but not
loaded to Cameras 14 and 15.
13 Ref. Transfer
CAM-> CARD->
CARD CAM
13 14 15 16 17 18
19 20 21 22 23 24
<Load error> Retry ?
CAM
5-32
Chapter 5 File Operations
Exit
CARD-> CAM->
CAMs CAMs
Enter
CAMs

5-6-5 Transferring the Scene Files

The MSU-700A/750 permits you to store the scene
files in an IC card and load them to a camera from the
card. It is also possible to send the scene files from
one camera to other cameras.
Use the Scene Transfer Menu for the transfer
operations.
The following five kinds of transfer operations are
possible for a group unit (five files per group).
• To save the scene files of a camera to a memory card
• To load the scene files from a memory card to a
camera
• To load the scene files from a memory card to
multiple cameras
• To send the scene files from one camera to other
multiple cameras
• To delete the scene files stored in a card
Notes
• When the Write-protect switch on the card is set to
ON, storing cannot be performed. Before a store
operation, be sure to set the switch to OFF.
• Sending the file to multiple cameras is possible only
among the cameras connected to the same CNU to
which the camera currently selected is connected.
<Examples>
When Camera 2 is selected in a system which is not
extended with the IF board of CNU: File transfer
is possible among Cameras 1 through 6.
When Camera 5 is selected in a system which is
extended with the IF board of CNU: File transfer
is possible among Cameras 1 through 12.
When Camera 17 is selected in a system which is
extended with the IF board of CNU: File transfer
is possible among Cameras 13 through 24.
• The file operating functions are not the same as those
of the cameras of other series (such as BVP-700-
series), and file transfer to/from cameras of other
series is not possible.
• The scene files loaded from a memory card or
transferred from another camera are not effective
until the Recall Scene File is performed on the
camera to recall those scene files.