Sony BVP-900 Series System Manual page 295

5-3 Storing the OHB File
2
Move the cursor to "OHB File Store" by turning
the MENU SELECT knob, then press the MENU
SELECT switch toward ENTER.
The OHB File Setup menu now appears.
OHB File Setup menu
* OHB File Setup *
Reset OHB File
Auto Black Shading
Auto White Shading
Auto Black Balance
3D Shading : ON
Store
3
Adjust the items to be stored in the OHB file.
1) Move the cursor to one of the items (Auto Black
Shading, Auto White Shading or Auto Black
Balance) using the MENU SELECT knob.
2) Press the MENU SELECT switch toward
ENTER.
Auto Setup for that item begins.
To activate the 3D shading compensation for Auto
White Shading, set the cursor to "3D Shading" and
press the MENU SELECT switch toward ENTER
to set it to "ON."
When Auto setup is completed, the message
"Completed" appears.
To cancel the auto setup
Press the MENU SELECT switch toward ENTER
again. The message "Break" appears, then the
status before starting Auto setup is resumed.
4
Turn the MENU SELECT knob and move the
arrow to the "Store" line, then press the MENU
SELECT switch toward ENTER.
Reading of the current settings begins.
When reading is completed
The read data are stored in the OHB unit as the
OHB file.
When file storage is completed, the message
"Completed" appears.
5-10
Chapter 5 File Operations
5
Slide the MENU SELECT switch toward
CANCEL return to the Maintenance menu.
To clear the OHB file data
Move the cursor to "Reset OHB File" on the OHB File
Setup menu, then press the MENU SELECT switch
toward ENTER.
To release the Maintenance menu
Return the DISPLAY switch to OFF.
To operate on the BVP-700/700P upgraded with
the BKP-7090/7090P
The camera can use the same menus as those of the
BVP-900/900P while the panel configuration differs.
For the operation on the BVP-700/700P, see "7-2-8
Adjustments of the BVP-700/700P Upgraded With the BKP-
7090/7090P."
To create the OHB file using the BVP-950/
950P
For the operations, use the ENTER/CANCEL switch,
DISPLAY switch and MIC1 LEVEL control.
Note
When the camera is installed in the CA-905F/905K,
use the rear control panel of the CA-905F/905K and
operate in the same manner as described for the BVP-
900/900P in the previous paragraph.
BVP-950/950P side panel
MIC1 LEVEL control
Inside the switch box
VTR
SEL
ENTER/CANCEL switch
DISPLAY switch
GAIN OUTPUT AUTO WHITE
KNEE
STBY CAM
L ON B
M A
H PRE
SAVE BARS OFF SET
DISPLAY TESTOUT
ENTER ON ENC
OFF RGB
CANCEL MENU SEL