Adjustments On The Bvp-900/900P; Menu Selection; Adjustments Of The Bvp-700/700P Upgraded With The Bkp-7090/ 7090P - Sony BVP-900 Series System Manual

7-2 Adjustments on the BVP-900/900P

Notes
• To use the BVP-900/900P as a standalone unit, the
optional BKP-7910/7910P is required.
• The BVP-700/700P upgraded with the BKP-7090/
7090P can use the same menus as those of the BVP-
900/900P while the panel configuration differs.
For the operation on the BVP-700/700P, see "7-2-8
Adjustments of the BVP-700/700P Upgraded With the BKP-
7090/7090P."

7-2-1 Menu Selection

Select adjustment menus from the Maintenance or
Operation menu.
For menu operations, use the DISPLAY switch,
MENU SELECT knob and MENU SELECT switch.
Rear panel of the BVP-900/900P
R G B
POWER
FILTER LOCAL 2 3 4 H-POSI V-POSI
1
5
ND
B C D WIDTH HEIGHT
A E
CC
CENTER SAFETY
ZONE UP TALLY MIX VF DISPLAY MENU SELECT
MARKER
ON ON ON ON ON
OFF
CANCEL ENTER
OFF OFF OFF OFF MENU
MENU SELECT switch
DISPLAY switch
To display the Operation menu
Set the DISPLAY switch to MENU.
The Operation menu appears in the viewfinder.
Operation menu
* Operation Menu *
Diagnose
Setup 1
Setup 2
Skin Tone Setup
Painting
File control
Shutter Setup
menu sel --> enter
Setup 2, Skin Tone Setup, Painting, File Control and
Shutter Setup provide menus for stand-alone operation.
The latter three menus are available only when the
7-2
Chapter 7 Stand-Alone Operations of Cameras, etc.
RET RET 1
RETURN
1
SELECT
2 3
1
4
STORE CURSOR
1 2 3
ON
VF DETAIL PinP
ON POSITION
CALL
ON
OFF OFF
MENU SELECT knob
RM-B150, RCP-700-series panel or MSU-700A/750 is
connected to the REMOTE connector of the camera
with the CCU-700A/700AP not connected.
To select a menu
Turn the MENU SELECT knob to set the cursor to the
line of the desired menu, then press the MENU
SELECT switch toward ENTER.
To release the Operation menu
Return the DISPLAY switch to OFF.
To display the Maintenance menu
While holding the MENU SELECT switch toward
ENTER, set the DISPLAY switch to MENU.
The Maintenance menu appears in the viewfinder.
Maintenance menu
* Maintenance Menu *
System Setup
Reference Store
Lens File Store
OHB File Store
Auto Iris Setup
RPN Correct
29F040-BVP-900 X.XX X
menu sel --> enter
For Reference Store, Lens File Store, and OHB File Store,
see Chapter 5 "File Operations."
To select a menu
Turn the MENU SELECT knob to set the cursor to the
line of the desired menu, then press the MENU
SELECT switch toward ENTER.
To release the Maintenance menu
Return the DISPLAY switch to OFF.