Setting The Security Status - Sony BVP-900 Series System Manual

3-4 Initial Settings for the Control System

3-4-2 Setting the Security Status

You can limit the control functions of the MSU-700A/
750 when required.
This status setting is enabled in Engineer mode.
Operation
Proceed as follows:
Menu operation block (Example: MSU-700A)
Configuration Menu
MODE
Configuration Menu
Camera CCU
MULTI
CNU MSU
1
CARD
CONFIG
MAINTENANCE
FILE
PAINT
1
Press to light the CONFIG button.
The Configuration Menu appears on the display.
2
Press [MSU].
The MSU Configuration Menu appears.
MSU Configuration
MSU MSU SW
Adjusting Set
Date /
Time
3-90
Chapter 3 Initial Settings
3
Press [Security].
The Security Menu display appears.
4
Press [Engineer Mode] to set it to inverse video.
2
The numeric keys and field for entering the code
No. are displayed.
5
Enter the security code using the numeric keys,
then press [OK].
Exit
Note
Each digit you input will be displayed as an
asterisk.
Security
The Security Menu items now appear.
Security Menu
Engineer Mode
Engineer Mode
Code No:
7 8 9
4 5 6
1 2 3
0
OK Cancel
Security Menu
Engineer Mode
Code
Status
Change
Engineer Mode
Exit
Exit