Sony BVP-900 Series System Manual page 319

5-6 File Transfer
To save the scene files to a card
To save the scene files being in a camera to a memory
card, proceed as follows.
For the storing operation for scene files, see "5-5 Storing
and Retrieving the Scene Files."
1
Using the camera select buttons, select the camera
in which the scene files to be saved have been
stored.
The selected camera number is displayed on the
upper left of the menu.
2
Press [CAM->CARD] to set it in inverse video.
13
Scene Transfer
CAM-> CARD-> CARD->
CARD CAM CAMs
No. Cam Date
1 13 95/07/03
2 19 95/06/13
3 4 95/06/19
4 1 95/06/20
5 7 95/06/13
6 7 95/06/13
7 20 95/06/13
8 20 95/06/13
Input card file no:
CAM CARD
The message "Input card file no;" appears. The
lowest unused number is selected as the
registration number.
To change the registration number
Enter the desired number using the numeric keys
on the display.
To overwrite an existing file group
Turn the leftmost control and move the cursor to
the desired file number.
3
Press [Enter].
The message "Save OK?" appears to confirm the
operation.
5-34
Chapter 5 File Operations
Exit
CAM->
Delete
CAMs
Time
7 8 9
13:36 BV9x
15:28 BV9x
13:25 BV9x
4 5 6
12:00 BV9x
17:41 BV9x
17:41 BV9x
1 2 3
17:42 BV9x
17:42 BV9x
0
Enter
15
Registration number
4
Press [Enter] again.
(To cancel, press [CAM->CARD] [now in inverse
video].)
When you press [Enter], transfer of the scene files
from the specified camera to the card begins.
During transfer, the message "Now saving" is
displayed.
When saving is completed
The message "Completed" is displayed, and the
previous display is resumed.
If saving fails, an error message is displayed.