Sony BVP-900 Series System Manual page 320

To load the scene files from a card
To load a scene-file group from a memory card to a
camera, proceed as follows.
Note
If no scene-file group exists in the card, this operation
is not possible.
1
Using the camera select buttons, select the
destination camera.
The selected camera number is displayed on the
upper left of the menu.
2
Press [CARD->CAM] to set it in inverse video.
13 Scene Transfer
CAM-> CARD-> CARD->
CARD CAM CAMs
No. Cam Date
1 13 95/07/03
2 19 95/06/13
3 4 95/06/19
4 1 95/06/20
5 7 95/06/13
6 7 95/06/13
7 20 95/06/13
8 20 95/06/13
Input card file no:
CAM CARD
The message "Input card file no;" appears.
3
Select the file group to be loaded.
(Enter the registration number using the numeric
keys on the display, or move the cursor to the
desired file number by turning the leftmost
control.)
4
Press [Enter].
The message "Load OK?" appears to confirm the
operation.
5
Press [Enter] again.
(To cancel, press [CARD->CAM] [now in inverse
video].)
When you press [Enter], transfer of the scene files
from the card to the specified camera begins.
During transfer, the message "Now loading" is
displayed.
Exit
CAM->
Delete
CAMs
Time
7 8 9
13:36 BV9x
15:28 BV9x
13:25 BV9x
4 5 6
12:00 BV9x
17:41 BV9x
17:41 BV9x
1 2 3
17:42 BV9x
17:42 BV9x
0
Enter
12
When loading is completed
The message "Completed" is displayed, and the
previous display is resumed.
Chapter 5 File Operations
5-35