Sony BVP-900 Series System Manual page 48

Attaching the CA-553/553P Camera
Adaptor
When the CA-553/553P Camera Adaptor is attached to
the BVP-950/950P, the camera can be used with the
BVV-5/5PS Videocassette Recorder, or CA-3/3P/3A/
3AP Camera Adaptor.
Attach the CA-553/553P to the back of the camera and
fasten four screws on the CA-553/553P.
1
Turn the LOCK screw on the camera counterclock
wise until it skids to release the lock.
2
Attach tha CA-553/553P to the camera, and fix it
with the four screws on the adaptor.
3
Tighten the LOCK screw with a coin or
screwdriver.
S
100 0
Pow er HAD
Attaching the CA-3/3P/3A/3AP Camera
Adaptor
When the CA-3/3P/3A/3AP Camera Adaptor is
attached to the BVP-950/950P with the CA-553/553P
mounted, the BVP-950/950P can be connected to a
portable VTR. Attach the CA-3/3P/3A/3AP as
described below.
Note
If the CA-3/3P/3A/3AP is attached to the camera, an
RM-P3/P9 Remote Control Unit cannot function even
if it is connected to the CA-3/3P/3A/3AP. Connect the
RM-B150 or RCP-700-series unit to the REMOTE
connector on the camera.
1
2
1
Attach the CA-3/3P/3A/3AP to the CA-553/553P.
2
Fix the CA-3/3P/3A/3AP with the two screws.
S
100 0
Pow er HAD
2-13
Chapter 2 Setup