Initializing The Ic Card - Sony BVP-900 Series System Manual

5-6 File Transfer

5-6-3 Initializing the IC Card

It is necessary to initialize the IC card before using it
for the first time.
If you insert a card which has not been initialized in
the MSU-700A/750, the message "Memory Card No
Initialize" appears. Initialize the card using the IC
Memory Card Menu.
Proceed as follows.
1
Press the CARD button of the menu operation
block of the MSU-700A/750.
The IC Memory Card Menu appears.
2
Press [Card Initialize].
The initialize operation area now appears.
3
Insert the card to be initialized into the card slot
and press [OK]. (To cancel the operation, press
[Cancel].)
Once you press [OK], initializing begins.
Note
If the Write-protect switch of the card is set to ON,
the message "Now write protection. Set write
enable" will be displayed, and the initialization
cannot be made. Set the switch to OFF, then retry
the initialization.
During the initialization
The message "Now memory card initializing" is
displayed.
When the initialization is completed
The message "Completed" and [Exit] appear.
Press [Exit] to release the menu.
5-26
Chapter 5 File Operations
IC Memory Card Menu
MODE
IC Memory Card Menu
Card
Initialize
1
MULTI
CARD
CONFIG
MAINTENANCE
FILE
PAINT
IC Memory Card Menu
Card
Initialize
Memory Card Initialize
Memory card format start.
OK Cancel
Initialize operation area
2
Example: MSU-700A