Notch Adjustment (Pal) - Sony BVP-900 Series System Manual

4-18 Notch Adjustment (PAL)

For the PAL models, the notch (SC trap) filter rejects
the cross color in the encoder output signal.
The rejection level and the target frequency can be set
with the MSU menu operation.
You can also turn on and off the notch filter on the
adjustment display.
Proceed as follows.
1
Press and light the PAINT button.
Paint menu 1/3 appears on the display.
2
Press 4 twice or $ once to flip the display to Paint
menu 3/3.
3
Press [Notch] of Paint menu 3/3 to set it to inverse
video.
The lower half of the display becomes the Notch
adjustment display.
4
Adjust the level and frequency with the right two
control knobs, respectively.
To turn on/off the function
Press [Notch] of the Notch adjustment display.
4-96
Chapter 4 Adjustments
Paint menu 1/3
MODE
Clear
V Mod Skin SAT/
Detail
Saw Detail Contrast
Gamma
Black White Flare
/Knee
MULTI
CARD
CONFIG
MAINTENANCE
FILE
1
PAINT
Paint menu 3/3 and Notch adjustment display
Clear
Mono
Notch Auto Iris
Color
Color
Matrix
Correct
Spread
Notch
Level
Home
2
1
3
Example:
MSU-700A
Home
ECS
/S-EVS
3
3
Notch
Frequency
3 -3