Loading a Reference File from an
SD Card
1
Select File >Reference File >Load
Reference(SD Card) in the setup menu.
A confirmation screen appears.
2
Turn the MENU knob to select
[Execute], then press the knob.
Resetting Current Settings and
Preset Values to Factory Default
Settings
1
Select File >Reference File >Clear
Reference in the setup menu.
A confirmation screen appears.
2
Turn the MENU knob to select
[Execute], then press the knob.
Saving and Loading
Lens Files
Insert a writable SD card (see page 69) into the
UTILITY SD card slot before proceeding.
Setting Lens File Data
Use File >Lens File in the setup menu to set the
data in lens files.
You can set the following data and save it as a
lens file.
Settings data
V modulation shading
correction values
Center marker position
Flare level
White balance correction
value
White shading correction
value
Saving Lens Files
To save a lens file in internal memory
1
Select File >Lens File >Store Internal
Memory in the setup menu.
A lens file list screen appears.
2
Turn the MENU knob to select a
destination, then press the knob.
You can save files in rows with File ID of
"No offset." Selecting a row with a specified
File ID name will overwrite the selected file.
The File ID is generated automatically, but
you can modify it.
174
Sub-items
M V Modulation
Lens Center H
Lens Center V
R Flare
G Flare
B Flare
White Offset R
White Offset B
Shading Ch Select
Shading H SAW
Shading H PARA
Shading V SAW
Shading V PARA