Sony BVP-900 Series System Manual page 146

1
While holding the ENTER/CANCEL switch to
ENTER, set the DISPLAY switch to MENU.
The Maintenance Menu appears on the monitor
screen.
* Mai n t en an e c Menu
Sy s e t m Se t up
m Re f r e en e S t o r e c
Le ns F i l e
S t o r e
O HB F i l e S t o r e
A uto I r i s Se t up
RPN C or e
r c t
28 F 2 0 0 - BV P 9 - 00
X XX
menu sel — >
e nt e r
2
Turn the MENU SELECT knob to place the cursor
to the Reference Store line.
3
Flip the ENTER/CANCEL switch to ENTER.
The Reference Store menu appears.
* Re f e r e ce n S t r o
m A l l P e r se t
S t o e r
4
Turn the MENU SELECT knob to place the cursor
to the All Preset line, and flip the ENTER/
CANCEL switch to ENTER.
The control data are then reset.
When resetting is finished
Set the DISPLAY switch to OFF. The display
disappears.
*
.
e
*
Resetting the control data of the BVP-950/950P
Turn the power of the BVP-950/950P ON, then
perform the following procedure.
MIC1 LEVEL control
VTR
STBY
SAVE
ENTER
SEL CANCEL
ENTER/CANCEL switch
DISPLAY switch
Side panel of the BVP-950/950P
1
While holding the ENTER/CANCEL switch to
ENTER, set the DISPLAY switch to MENU.
The Maintenance Menu appears on the monitor
screen.
2
Turn the MIC 1 LEVEL control to place the cursor
to the Reference Store line.
3
Flip the ENTER/CANCEL switch to ENTER.
The Reference Store menu appears.
4
Turn the MIC 1 LEVEL control to place the cursor
to the All Preset line, and flip the ENTER/
CANCEL switch to ENTER.
The control data are then reset.
When resetting is finished
Set the DISPLAY switch to OFF. The display
disappears.
Resetting the control data of the BVP-950/
950P mounted on the CA-905F/905K
The control data can be reset in the same way as for the
BVP-900/900P.
For details, see "Resetting the control data of the BVP-900/
900P."
GAIN OUTPUT AUTO WHITE
KNEE
CAM
L ON B
M A
H PRE
BARS OFF SET
DISPLAY TESTOUT
ON ENC
OFF RGB
MENU SEL
3-65
Chapter 3 Initial Settings