Sony BVP-900 Series System Manual page 315

5-6 File Transfer
To load the reference file from a card to multiple cameras
To load the reference file from a memory card to
multiple cameras, proceed as follows.
1
Press [CARD->CAMs] to set it in inverse video.
The camera select buttons and the message "Select
destination camera" appear on the display.
2
Use the camera select buttons to select the
destination cameras (to which the reference file is
to be loaded) to set them in a shaded background
(for example, as with 13, 14 and 16 in the figure).
3
When selection of the destination cameras is
completed, press [Enter].
The message "Load OK?" appears to confirm the
operation.
4
Press [Enter] again.
(To cancel, press [CARD->CAMs] [now in inverse
video].)
When you press [Enter], transfer of the reference
file from the card to the specified cameras begins.
During transfer, the message "Now loading" is
displayed.
When loading is completed
The message "Completed" is displayed, and the
previous display is resumed.
If loading fails
The error message "<Load error> Retry?" is
displayed, and the camera select buttons of the
cameras for which the loading failed remains
displayed with a shaded background.
To retry loading, press [Enter]. To cancel the
operation, press [CARD->CAMs] (now in inverse
video).
5
Execute the auto level setup on each camera.
5-30
Chapter 5 File Operations
13 Ref. Transfer
CAM-> CARD-> CARD-> CAM->
CARD CAM CAMs CAMs
13 14 15 16 17 18
19 20 21 22 23 24
Select destination camera:
CAMs CARD
Example: To load to Cameras 13, 14 and 16
13 Ref. Transfer
CAM-> CARD-> CARD-> CAM->
CARD CAM CAMs CAMs
13 14 15 16 17 18
19 20 21 22 23 24
Load OK ?
CAMs CARD
Example: The file is correctly loaded to Camera 13,
but not loaded to Cameras 14 and 16.
13
Ref. Transfer
CAM-> CARD-> CARD-> CAM->
CARD CAM CAMs CAMs
13 14 15 16 17 18
19 20 21 22 23 24
<Load error> Retry ?
CAMs CARD
Exit
Enter
Exit
Enter
Exit
Enter